Online Catalog

FSP60

FSP60 SPECIFICATION & THERMAL DATA

Model Name :
FSP60-
B
M51
-
Heat Sink Height (h)
8 mm
10 mm
12 mm
15 mm
20 mm
25 mm
Fan
 M51
 No fan required
  • For ordering of individual components, such as push pins or springs, please visit each link/page.
  Push pins Springs
-- -------- -------- -- --------
No pushpin and spring required
 Thermal Interface
-- --
No thermal interface required

Note

The thermal interface materials listed here are phase change materials (PCMs). These PCMs are naturally tacky and will be pre-applied to the heat sink. However, PCMs may peel-off from the heat sink base when removing the release liner prior to heat sink installation. Since PCMs rely on their natural tackiness instead of an adhesive, this can happen. In light of this, we recommend that our customers apply additional pressure to the PCMs prior to removing the protective liner to allow the PCMs to wet out on the heat sink surface (refer to instruction item #4 below). Storage and Handling Instruction

Dimension and Thermal Data
  • HEAT SINK
    MATERIAL : A6063
    FINISH : BLACK ANODIZE
  • FAN
    M51 : COFAN F-5010HH12B-11
    50 SQ ±0.4, 11 ±0.3 THK
  • SCREW (QTY 4) PAN HEAD PHILLIPS M3 STEEL Cr3+
HEATSINK ONLY
HEATSINK HEIGHT (h) WEIGHT (grams)
8.00 38.7
10.00 41.3
12.00 43.9
15.00 47.9
20.00 54.4
25.00 61.0
HEATSINK AND FAN ASSEMBLY
MODEL WEIGHT (grams)
FSP60-8M51 62.6
FSP60-10M51 65.6
FSP60-12M51 68.5
FSP60-15M51 73.0
FSP60-20M51 80.3
FSP60-25M51 87.7
Contact | © 2018 Alpha Company Ltd.